OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0010

Medium Speed CAN Communication Bus

U0010 is the general fault code for the medium-speed CAN, a slower two-wire network that several makers run next to the fast powertrain bus. Saab/GM documents it as mid-speed GMLAN with (+) and (-) wires and a terminating resistor across them, Ford as MS-CAN; on the F-Super Duty an unplugged connector C408 interrupts it and takes climate control, front control panel and headlamp logic down with it. Code-specific users are Volvo and Mack: their aftertreatment module logs U0010-88 together with U0001-88 when chafed wiring cuts communication, with MIL and possible derate. Ford, by contrast, tells Transit technicians to ignore a U0010 in the rear camera module after BCM programming if the camera works. On passenger cars a fault here mainly costs comfort functions, not driveability.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number– / 10

Possible causes

  • Connector in the medium-speed network unplugged or not seated high
  • Harness chafed or wet at doors, tailgate or body mounts medium
  • Residual code after module replacement or programming medium

Symptoms

  • Climate control, lighting or infotainment functions inoperative
  • Several body modules unreachable with the scan tool
  • On heavy trucks MIL and engine derate possible

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for U0010

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication