OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic or reserved

P34C3

B Camshaft Position Actuator Position Sensor A Circuit High Bank 2

P34C3 completes the sensor group of actuator B: on bank 2, sensor A watching the exhaust-side actuator puts out a voltage beyond its permitted range. A broken sensor ground, an open signal path or contact with a feed line are the usual causes. No manufacturer publishes P34C3. Mercedes-Benz, whose CAMTRONIC V8 uses neighbouring codes on this bank (P34C1, P34C2), lists no high fault, and the 2022 Mitsubishi Outlander has no electric exhaust actuator at all – its exhaust camshaft is shifted through an oil control solenoid that the fail-safe fixes in its reference position together with the electric intake motor. Until the cause is found the bank 2 exhaust adjustment stays in its default state, so drivers mainly see the warning lamp. Bank 1: P34BF.

SystemPowertrain
Typegeneric or reserved
GroupP3
Range / number4 / C3

Possible causes

  • Sensor ground on bank 2 broken high
  • Signal line in contact with a supply wire medium
  • Sensor in the bank 2 exhaust actuator faulty medium

Symptoms

  • Malfunction indicator lamp lit
  • Bank 2 exhaust adjustment held in base position

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P34C3

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication