P34C2
B Camshaft Position Actuator Position Sensor A Circuit Low Bank 2
Mercedes-Benz documents this code as P34C200: on cylinder bank 2, the feedback line of CAMTRONIC exhaust solenoid 1 is grounded. The code is one of sixteen that bulletin LI05.20-P-080192 groups together for engine types M176 and M177, found in AMG 63 models as well as S-Class, G-Class and GLS cars. Since heat damage turned up on wiring that runs over the firewall beside the windscreen, a harness inspection comes first, before parts are replaced; Mercedes also wants actuators with the older numbers ending 02 03, 16 00, 03 03 and 17 00 exchanged for the current versions and the engine software updated. A low signal can also come from an actuator with internal damage. Bank 1 low: P34BE; bank 2 high: P34C3.
Possible causes
- Harness near the windshield heat-damaged, signal to ground high
- Sensor in the bank 2 CAMTRONIC actuator shorted medium
- Engine control software outdated low
Symptoms
- Check engine light on
- CAMTRONIC limp-home, exhaust lift on bank 2 fixed
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P34C2
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.