P34BD
B Camshaft Position Actuator Position Sensor A Range/Performance Bank 1
P34BD has a documented user. Mercedes-Benz lists P34BD09 in bulletin LI05.20-P-080192, dated 14 January 2026, for M176/M177 V8 engines with CAMTRONIC, used for example in the AMG C 63 and E 63, the G 550 and the Maybach GLS 600. Its fault text reports the feedback from exhaust-side CAMTRONIC solenoid 1 of bank 1 as faulty and classes it as a component fault. Mercedes names software and hardware as the cause: update the ME engine control unit, check the part numbers of all CAMTRONIC actuators and replace older ones (A177 982 03 03 or 17 00 by 19 00, 02 03 or 16 00 by 18 00), and look for heat-damaged wiring at the bulkhead. P005A (exhaust solenoid 1 jammed off) and the limp-home code P164B often come along. Bank 2: P34C1.
Possible causes
- Engine control software outdated (Mercedes M176/M177: update) high
- CAMTRONIC actuator of a superseded part number high
- Harness heat-damaged above the bulkhead medium
Symptoms
- Check engine light on
- CAMTRONIC in limp-home mode, often with further CAMTRONIC codes
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P34BD
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.