P34BA
B Camshaft Position Actuator Temperature Sensor Circuit Low Bank 2
P34BA tells that the temperature signal from bank 2's exhaust actuator is pulled under its lower limit. Typical sources are a signal wire that has found ground, for instance where the harness runs close to hot exhaust parts, or a sensor element shorted inside the actuator. If the controller reads the low voltage as heat, it protects the actuator by reducing its current, as Aisin describes, so the bank 2 exhaust timing may no longer follow its target and timing codes such as P0024 can follow. The code is catalogued by NTN-SNR; no maker publishes it, so any threshold remains unknown. Repairs range from mending a wire to replacing the actuator, because the sensor sits in its electronics. Bank 1 low: P34B6; bank 2 high: P34BB.
Possible causes
- Harness near exhaust parts damaged, signal shorted to ground high
- Sensor element shorted inside the bank 2 actuator medium
- Input of the controlling module faulty low
Symptoms
- Malfunction indicator lamp lit
- Bank 2 exhaust timing limited, possibly with additional timing codes
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P34BA
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.