P34B9
B Camshaft Position Actuator Temperature Sensor Range/Performance Bank 2
With P34B9 the bank 2 exhaust actuator reports a temperature that is electrically valid but does not make sense. A two-bank engine offers an obvious yardstick: after a long cold soak both exhaust actuators should read almost the same, and under equal load they should warm alike. Whether any carmaker applies such logic to P34B9 is not published; the code appears only in lists such as the one from NTN-SNR. CARB requires VVT input components to be checked for rationality where feasible, not just for open and shorted circuits. A drifting sensor, a contact resistance that shifts the reading or outdated module software are the plausible causes. In Aisin's design a false hot value would cut motor current needlessly. Bank 1: P34B5.
Possible causes
- Bank 2 actuator temperature sensor drifting medium
- Contact resistance at the plug shifting the value medium
- Module software outdated low
Symptoms
- Malfunction indicator lamp lit
- Usually no change in driveability
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P34B9
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.