P34B8
B Camshaft Position Actuator Temperature Sensor Circuit Bank 2
P34B8 is the circuit fault for the heat sensor inside exhaust camshaft actuator B of bank 2, the row without cylinder 1 on a V or flat engine. If P34B4 is stored at the same time, a shared feed, a common ground or the control module is more likely than two failed sensors at once. The code family presumes an electrically driven exhaust phaser with its own heat-sensitive driver: NTN-SNR files it under outlet camshaft adjustment, and Aisin's patent explains why such a driver carries a temperature sensor at all. A carmaker using P34B8 could not be found in bulletins or official service information. In practice: check plug and harness on bank 2 first, then the actuator itself. For a signal stuck low or high on bank 2 see P34BA and P34BB.
Possible causes
- Connector or harness at the bank 2 exhaust actuator open high
- Shared supply or ground faulty (when bank 1 also reports) medium
- Temperature sensor in the bank 2 actuator failed medium
Symptoms
- Malfunction indicator lamp lit
- Exhaust phasing on bank 2 restricted, banks may run slightly unevenly
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P34B8
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.