OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic or reserved

P34B7

B Camshaft Position Actuator Temperature Sensor Circuit High Bank 1

P34B7 sets when the heat reading delivered by exhaust actuator B, bank 1, sits above its upper limit. Electrically this points to an open signal line, a detached sensor ground or contact with battery or reference voltage; with a negative-coefficient element the module would see an implausibly cold actuator. A cold reading harms nothing by itself, but it robs the controller of its heat protection – in Aisin's design the reading decides when the holding current at the end stop must be cut back – so the module will typically stop relying on electric phasing. NTN-SNR describes P34B7 as an excessive outlet-side signal. No manufacturer text on this code is published. CARB obliges the OBD system to recognise such open or shorted circuits. Low counterpart: P34B6.

SystemPowertrain
Typegeneric or reserved
GroupP3
Range / number4 / B7

Possible causes

  • Signal line or sensor ground interrupted, plug corroded high
  • Signal line shorted to a supply wire medium
  • Sensor element open inside the actuator medium

Symptoms

  • Malfunction indicator lamp lit
  • Exhaust cam on bank 1 held in its default position

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P34B7

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication