OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic or reserved

P34B6

B Camshaft Position Actuator Temperature Sensor Circuit Low Bank 1

Circuit Low means the voltage on the signal wire of the exhaust actuator B temperature sensor (bank 1) stays under its lower limit. Which temperature that stands for depends on a sensor curve that no public source gives; with a thermistor whose resistance falls as it warms, a short to ground would look like extreme heat. Aisin's patent shows what a hot reading triggers: the controller lowers the motor current and may even switch the motor off at a preset threshold, so exhaust phasing loses authority. In the NTN-SNR catalogue P34B6 appears as an undersized outlet-side signal. Wires rubbing on the cylinder head and a sensor shorted inside are the main suspects. No carmaker documents P34B6. High: P34B7; bank 2: P34BA.

SystemPowertrain
Typegeneric or reserved
GroupP3
Range / number4 / B6

Possible causes

  • Signal wire chafed through and touching ground high
  • Sensor element shorted inside the actuator medium
  • Actuator driver genuinely overheated by a binding phaser low

Symptoms

  • Malfunction indicator lamp lit
  • Exhaust phasing on bank 1 reduced, slightly rougher idle possible

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P34B6

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication