OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic or reserved

P34B4

B Camshaft Position Actuator Temperature Sensor Circuit Bank 1

P34B4 reports that the circuit of the temperature sensor on camshaft actuator B, bank 1, cannot be evaluated: an open line, a disconnected plug or a reading that fits no valid state. In the supplier list of NTN-SNR the letter B stands for the outlet camshaft, so the code targets an exhaust phaser turned by an electric motor whose electronics need heat protection. An Aisin patent mounts such a sensor on the motor control board and calls the intake shaft merely an example. We found no carmaker that publishes P34B4; the 2022 Mitsubishi Outlander, for instance, drives only its intake cam electrically and shifts the exhaust cam with an oil control solenoid. Expect restricted exhaust phasing until the circuit is repaired. Low and high faults: P34B6, P34B7.

SystemPowertrain
Typegeneric or reserved
GroupP3
Range / number4 / B4

Possible causes

  • Plug at the exhaust actuator not seated or wire broken high
  • Temperature sensor in the actuator electronics failed medium
  • Faulty input stage in the controlling module low

Symptoms

  • Malfunction indicator lamp lit
  • Exhaust cam timing on bank 1 fixed or limited
  • Driving usually unaffected

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P34B4

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication