P34B2
A Camshaft Position Actuator Position Sensor A Circuit Low Bank 2
P34B2 is set when position sensor A on the intake phaser of bank 2 delivers a voltage below its permitted window. Public manufacturer information on this code is lacking. On the 2022 Mitsubishi Outlander the bank 1 version P34AE is evaluated by the electric valve timing module and traced to the actuator circuit or the actuator. Mercedes calls the corresponding low code of its CAMTRONIC exhaust sensors on bank 2 (P34C2) a ground short and, in bulletin LI05.20-P-080192, has the engine harness by the bulkhead inspected for scorching. A grounded signal wire, a missing sensor supply or a shorted sensor are therefore the first things to rule out on bank 2. High is P34B3, bank 1 P34AE.
Possible causes
- Signal wire grounded, harness heat-damaged high
- Sensor supply interrupted medium
- Sensor in the actuator shorted medium
Symptoms
- Check engine light on
- Bank 2 intake phasing switched off
- Possibly codes from other sensors on the same supply
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P34B2
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.