P34B1
A Camshaft Position Actuator Position Sensor A Range/Performance Bank 2
P34B1 means the intake-side position sensor A of bank 2 delivers an electrically sound but implausible value. No public manufacturer document uses this code. The nearest published example is the bank 1 code P34AD on the 2022 Mitsubishi Outlander, where the electric phaser module checks the motor position against the intake camshaft sensor and flags a mismatch. Mercedes uses the same fault type on the exhaust side for its CAMTRONIC lift actuators (P34BD, P34C1); bulletin LI05.20-P-080192 answers it with an engine software update and actuators of a newer part number. On bank 2 an actuator that binds or has worn, a lost learned position or a camshaft signal problem (compare P0021) are likely. The bank 2 phaser is then locked at its base angle.
Possible causes
- Actuator on bank 2 sticking or worn high
- Learned actuator position lost or software outdated medium
- Bank 2 intake camshaft signal disturbed medium
Symptoms
- Check engine light on
- Bank 2 intake timing fixed, reduced power
- Possibly further timing codes such as P0021
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P34B1
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.