OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic or reserved

P34A9

A Camshaft Position Actuator Temperature Sensor Range/Performance Bank 2

P34A9 covers the plausibility check of the temperature sensor at intake cam actuator A on bank 2. Nissan names it together with P34A5 in bulletins NTB18-016 (2018 Pathfinder) and ITB18-009 (2018 QX60): vehicles built before 18 December 2017 could store one or both codes and switch on the MIL when started in freezing weather. Nissan traced this to the electric intake valve timing control module and first replaced the module with one carrying newer software; a later revision moved the fix to a reprogramming campaign. If P0021 or other timing codes are stored, they take priority. Outside this case, a sensor whose reading wanders or a poor contact at the bank 2 actuator are the candidates. Bank 1 is P34A5.

SystemPowertrain
Typegeneric or reserved
GroupP3
Range / number4 / A9

Possible causes

  • Module software (Nissan 2018 Pathfinder/QX60, reprogramming) high
  • Sensor reading wandering or slow medium
  • Poor contact at the bank 2 actuator plug low

Symptoms

  • Check engine light on after a start in freezing weather
  • Engine runs normally in most cases

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P34A9

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication