P34A8
A Camshaft Position Actuator Temperature Sensor Circuit Bank 2
P34A8 mirrors P34A4 on bank 2: the module detects an open or otherwise faulty circuit at the temperature sensor of intake cam actuator A on the side without cylinder 1. Only V and boxer engines have this bank. The one documented user of the family, Nissan's electric intake valve timing on the 2018 Pathfinder and QX60, monitors both banks separately (range codes P34A5 and P34A9), yet P34A8 itself turns up in no manufacturer document we could find. NTN-SNR describes it as an electrical fault of the inlet-side temperature sensor on the second bank. Typical findings are a corroded plug, a chafed harness near the cylinder head or a failed sensor. Range, low and high are P34A9, P34AA and P34AB.
Possible causes
- Plug at the bank 2 actuator corroded or not latched high
- Harness chafed near the cylinder head medium
- Temperature sensor failed medium
Symptoms
- Check engine light on
- Intake phasing on bank 2 restricted
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P34A8
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.