P34A5
A Camshaft Position Actuator Temperature Sensor Range/Performance Bank 1
P34A5 means the temperature reported for intake cam actuator A on bank 1 passes the electrical checks yet makes no sense. Nissan describes the code for the 2018 Pathfinder (R52) and the Infiniti QX60 built before 18 December 2017: the MIL came on after starts at ambient temperatures around or below 0 °C. The remedy in bulletin NTB18-016 was a new electric intake valve timing control module with updated software, followed by a position learning run for the actuator; the revised bulletin NTB18-016a hands this over to the reprogramming campaign NTB18-072. Timing codes such as P0011 must be fixed before this one. Away from that software case, look for a drifting sensor or a loose contact. Drivers usually notice nothing. Bank 2 is P34A9.
Possible causes
- Software of the electric valve timing module (Nissan 2018: cold-start false alarm) high
- Temperature sensor drifting out of its expected range medium
- Intermittent contact at the actuator plug low
Symptoms
- Check engine light on, often after a cold start
- Usually no driveability complaint
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P34A5
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.