P34A4
A Camshaft Position Actuator Temperature Sensor Circuit Bank 1
P34A4 flags an electrical problem of any kind in the temperature sensor circuit of intake camshaft actuator A on bank 1: a wire broken somewhere, a plug that has worked loose, or a value no valid window accepts. Such a sensor belongs to electrically driven phasers; an Aisin patent places it on the motor driver board and reduces motor current once that board stays hot. NTN-SNR lists P34A4 as the inlet-side temperature sensor with an electrical fault. Nissan uses this family on the electric intake valve timing of the 2018 Pathfinder and QX60 but only publishes the range codes P34A5 and P34A9; a public text on P34A4 itself is not known. Without a valid temperature the controller can no longer guard the motor and normally restricts phasing. Low and high faults are P34A6 and P34A7.
Possible causes
- Plug at the actuator loose or corroded, sensor wire broken high
- Temperature sensor in the actuator or its electronics failed medium
- Fault in the module that drives the electric phaser low
Symptoms
- Check engine light on
- Intake cam phasing on bank 1 restricted or held in its base position
- Often no noticeable change while driving
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P34A4
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.