OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic or reserved

P34A2

Cylinder 11 Deactivation/Intake Valve Performance

P34A2 names a mechanical deactivation fault on cylinder 11: the valves continued to operate although the cylinder had been switched off. No manufacturer documents this code publicly. The nearest production example is the Active Cylinder Control that Mercedes fitted to the 5.8 l V12 of the CL 600 and S 600 from 2001; it idled one bank and uncoupled its exhaust valves by means of two solenoids; a stuck switching element there would produce exactly the fault this code describes. For eight-cylinder engines GM uses P3498 to P349F, judged by manifold pressure and stored as Type B after 22 failures in 25 checks. P3482 is the control-performance code for cylinder 11, and a misfire there would be P0311.

SystemPowertrain
Typegeneric or reserved
GroupP3
Range / number4 / A2

Possible causes

  • Valve switching element of cylinder 11 jammed high
  • Oil pressure supply to the switching parts disturbed medium
  • Low or degraded oil low

Symptoms

  • Check engine lamp on
  • Rough running when one bank is shut down
  • Higher fuel use

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P34A2

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication