OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic or reserved

P34A1

Cylinder 10 Deactivation/Intake Valve Performance

P34A1 would mean that cylinder 10 kept opening its valves while it was supposed to be deactivated. No manufacturer documents this code publicly; it only makes sense on V10, V12 or W12 engines. Lamborghini, for instance, gave the Aventador LP 700-4 a Cylinder Deactivation System that rests one bank at speeds under 135 km/h, but no public diagnostic table lists P34A1. The physics of a check is shared with smaller engines: Ford's patent US8667835B2 watches the rise and fall of manifold pressure across successive intake events and compares it with the commanded pattern. Causes would mirror those of the V8 codes P3498 to P349F: a stuck switching element, a faulty oil control valve or poor oil. P3474 covers the control side of cylinder 10.

SystemPowertrain
Typegeneric or reserved
GroupP3
Range / number4 / A1

Possible causes

  • Switching element of cylinder 10 not unlocking high
  • Deactivation oil control valve sticking medium
  • Oil level too low or oil aged medium

Symptoms

  • Check engine lamp on
  • Reduced-cylinder mode no longer offered
  • Uneven running at low load

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P34A1

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication