OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic or reserved

P34A0

Cylinder 9 Deactivation/Intake Valve Performance

P34A0 is reserved for a cylinder 9 that keeps its valves moving after the engine computer has ordered it off, which presumes an engine with at least nine cylinders and per-cylinder valve switching. No manufacturer documents this code publicly. The twelve-cylinder engines with deactivation found so far work bank by bank; Bentley's W12 in the 2020 Bentayga Speed, for example, alternates between two complete banks of six. A monitor would work like GM's tests for cylinders 1 to 8 (P3498 to P349F), where manifold pressure that stays too high in skipped events reveals a cylinder that is still breathing. CARB requires such mechanical checks for valve control systems. P3466 is the control-performance code for cylinder 9.

SystemPowertrain
Typegeneric or reserved
GroupP3
Range / number4 / A0

Possible causes

  • Switching lifter or rocker of cylinder 9 stuck high
  • Oil control valve for the deactivation not switching medium
  • Low or degraded oil medium

Symptoms

  • Check engine lamp on
  • Rough running in reduced-cylinder mode
  • Higher fuel use

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P34A0

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication