OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic or reserved

P349F

Cylinder 8 Deactivation/Intake Valve Performance

P349F reports that cylinder 8 failed to go quiet when commanded. California's OBD rule requires makers to analyse every plausible hydraulic or mechanical failure of variable valve systems and mentions, among its examples, a lift-mechanism pin of one cylinder that will not shift; codes like this one follow from that duty. GM implements it for cylinder 8 on its L84 and L87 DFM V8s: filtered manifold pressure above the deactivation threshold in 22 out of 25 chances, rated Type B, so the lamp lights on the second faulty trip. GM's LT2 and LTA engines also rest cylinder 8, but no public GM table assigns P349F to them. Typical causes are a lifter stuck in its locked state, a failing oil solenoid or sludge. P3458 is the control-side code, P0308 the misfire code.

SystemPowertrain
Typegeneric or reserved
GroupP3
Range / number4 / 9F

Possible causes

  • Lifter of cylinder 8 stuck in its locked state high
  • Weak or sticking oil solenoid of cylinder 8 medium
  • Sludge or debris in the lifter oil passages medium
  • Stored after a voltage dip at cranking, ECM software update needed low

Symptoms

  • Check engine lamp on after two trips
  • Engine stays on all cylinders, fuel use rises
  • Ticking noise at idle

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P349F

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication