P349E
Cylinder 7 Deactivation/Intake Valve Performance
P349E covers cylinder 7: deactivation was commanded, yet the cylinder kept its valve events. In GM's DFM design the intake lifter is unlocked first, while the exhaust lifter can only release once its cam lobe is back on the base circle; a sluggish pin therefore tends to leave the exhaust side working. GM's L84 and L87 check spots this through manifold pressure at each 90 degrees of crank rotation and stores a Type B code once 22 out of 25 opportunities have failed. Tula Technology, a specialist in skip-fire control, patented a check that combines intake pressure pulses with measured versus modelled crankshaft acceleration (US9891137B2). The wiring codes for cylinder 7 are P3449, P3451 and P3452. A driver may hear ticking and see the lamp.
Possible causes
- Sluggish locking pin, mostly in the exhaust lifter of cylinder 7 high
- Oil solenoid of cylinder 7 not opening fully medium
- Low, thin or aerated oil medium
Symptoms
- Ticking from the valve train
- Check engine lamp on
- Cylinder deactivation inhibited, higher consumption
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P349E
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.