P349D
Cylinder 6 Deactivation/Intake Valve Performance
P349D indicates that cylinder 6 drew in and pushed out air during events in which it should have stayed sealed. The test logic rests on a simple effect: every intake stroke leaves a dip in manifold pressure, so a resting cylinder should leave none. Ford's patent US8667835B2 and Delphi's US7314034B1 describe tracking these pulses event by event. GM applies the idea to its L84 and L87 V8s with filtered manifold pressure, 22 failures out of 25, Type B. The older GM AFM V8s also switch off cylinder 6, but there faults surface through the bank code P3400. Likely causes are a lifter whose locking pins do not release, a sticking solenoid or poor oil. P3442 is the control-performance sibling, P0306 the misfire code of this cylinder.
Possible causes
- Locking pins of the cylinder 6 lifters do not release high
- Oil solenoid of cylinder 6 sticking medium
- Low oil level or degraded oil medium
- Intake leak or MAP sensor fault distorting the pressure pulses low
Symptoms
- Check engine lamp on
- Higher fuel use in light-load cruising
- Ticking from the engine valley
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P349D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.