OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic or reserved

P349B

Cylinder 4 Deactivation/Intake Valve Performance

P349B is set when cylinder 4 fails to shut its valves on command. On Mazda's 2.5 l Skyactiv-G with cylinder deactivation (CX-5 and Mazda6, 2018-2019), cylinders 1 and 4 can be switched off; service alerts SA-041/18 and SA-022/19 tie P349B, P3498, P3400, P0304 and P0340 to a rocker arm that fell out of place or broke. Technicians are told to check the oil change records as well, and Mazda handles such cases with a replacement engine. GM's L84 and L87 use the code for cylinder 4 with the same manifold pressure test as for the other seven cylinders, Type B. Circuit faults would be P3425, P3427 and P3428, the control-performance code P3426. Expect noise from the head, rough idle and weak pull.

SystemPowertrain
Typegeneric or reserved
GroupP3
Range / number4 / 9B

Possible causes

  • Rocker arm of cylinder 4 fallen out of place or broken (Mazda) high
  • Long oil change intervals or unsuitable oil medium
  • Deactivation lifter of cylinder 4 stuck locked (GM DFM) medium
  • Oil control solenoid of cylinder 4 faulty low

Symptoms

  • Rough idle and misfire on cylinder 4 (P0304)
  • Clatter or knocking from the valve cover area
  • Lack of power
  • Check engine lamp on

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P349B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication