OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic or reserved

P3498

Cylinder 1 Deactivation/Intake Valve Performance

P3498 flags a mechanical failure on cylinder 1: the control unit commanded it off, but its valves kept opening. This differs from P3402, which concerns the control side, and from the wiring codes P3401, P3403 and P3404. GM runs the check on its 5.3 l L84 and 6.2 l L87 Dynamic Fuel Management V8s by watching filtered manifold pressure every 90 crank degrees; if it stays above a threshold while cylinder 1 should be resting, 22 failures in 25 chances log a Type B code. Mazda's 2.5 l engines, which deactivate cylinders 1 and 4, show it together with P349B when a rocker arm has dropped out or broken (SA-041/18, SA-022/19); Mazda then authorises a replacement engine. Drivers notice the lamp, rough running or a loss of power.

SystemPowertrain
Typegeneric or reserved
GroupP3
Range / number4 / 98

Possible causes

  • Switchable rocker arm of cylinder 1 dropped out or broken (Mazda) high
  • Deactivation lifter of cylinder 1 stays locked (GM DFM) medium
  • Lifter oil solenoid of cylinder 1 sticking or with protruding pole piece medium
  • Overdue oil changes or wrong oil grade medium

Symptoms

  • Check engine lamp on
  • Rough idle or misfire on cylinder 1 (P0301)
  • Clatter from the cylinder head and loss of power
  • Cylinder deactivation no longer used, higher fuel use

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P3498

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication