OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic or reserved

P3497

Cylinder Deactivation System Bank 2

P3497 is the bank 2 counterpart of P3400: the control unit concludes that deactivation on the bank that lacks cylinder 1 is failing as a whole, and it blames no single cylinder circuit. Honda's VCM V6 links it to rocker arm oil pressure switch C (P3400 belongs to switch B); bulletin 13-055 for the 2013 Odyssey and Pilot shows both codes after cold starts with oil pressure above 92 psi, which moved the spool valves and cut cylinders the ECU had not selected. The fix there was a new relief valve spring. Ram lists P3497 for the 2023 5.7 l Hemi eTorque and cures it with PCM software (18-002-25). Expect a warning lamp, misfire codes and rough running during warm-up.

SystemPowertrain
Typegeneric or reserved
GroupP3
Range / number4 / 97

Possible causes

  • Excess oil pressure on cold start, e.g. weak relief valve spring medium
  • Low oil level, wrong grade or overdue oil change on bank 2 high
  • Switchable rocker arm or lifter on bank 2 sticking or not latching medium
  • Rocker arm oil pressure switch of bank 2 reporting wrongly low
  • Engine control software needing an update low

Symptoms

  • Check engine lamp on
  • Misfire codes on bank 2 cylinders, mostly after a cold start
  • Rough idle while the engine warms up
  • Reduced-cylinder mode no longer used, higher fuel use

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P3497

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication