P3496
Cylinder 12 Exhaust Valve Control Circuit High
P3496 is the final code of the per-cylinder valve block: it marks the cylinder 12 exhaust valve control circuit as too high, typically a short to battery voltage or a coil with shorted turns. No manufacturer documents this code publicly; J2012 reserves the codes for cylinders 9 to 12 for engines with more than eight cylinders. Bentley built its last W12 in 2024 after describing a shut-off that idles one bank of six under part or trailing throttle, and the Lamborghini Aventador V12 shut one bank below 135 km/h; neither documents an exhaust actuator for cylinder 12. The clearest public account of exhaust valves following their own switching sequence remains a GM patent. Should the code appear, the module will disable deactivation. P3493 (open) and P3495 (low) complete the set, P3497 is the bank 2 system code.
Possible causes
- Exhaust actuator wire of cylinder 12 shorted to battery voltage medium
- Shorted turns in the exhaust actuator coil medium
- Engine control module output damaged low
Symptoms
- Check engine lamp on
- Cylinder shut-off disabled
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P3496
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.