P3483
Cylinder 11 Deactivation/Intake Valve Control Circuit Low
P3483 is stored for a low signal on the control circuit of the cylinder 11 deactivation or intake valve actuator, in practice a short to ground. No manufacturer documents this code publicly; J2012 reserves the codes for cylinders 9 to 12 for engines with more than eight cylinders. Cylinder 11 exists only on twelve-cylinder engines; among those with shut-off are Bentley's W12, Lamborghini's Aventador V12 and, historically, Mercedes' M137. GM's analogous V8 test treats under 0.5 ohm to ground with the driver off as a fault once 20 of 25 samples agree, with the enable conditions of 11 V system voltage and 425 rpm. A grounded line can energise the actuator continuously and take cylinder 11 out at the wrong time. Siblings: P3481 (open) and P3484 (high).
Possible causes
- Cylinder 11 control line shorted to ground high
- Cylinder 11 actuator shorted internally medium
- Moisture at the actuator connector low
- Engine control module output faulty low
Symptoms
- Check engine lamp on
- Cylinder shut-off disabled
- Possible misfire on cylinder 11
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P3483
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.