OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic or reserved

P3482

Cylinder 11 Deactivation/Intake Valve Control Performance

P3482 is the functional check for cylinder 11: the actuator circuit is electrically fine, but the cylinder does not actually go dormant or wake up when told to. No manufacturer documents this code publicly; J2012 reserves the codes for cylinders 9 to 12 for engines with more than eight cylinders. Bentley's Bentayga and Continental W12 can run on six of twelve cylinders, yet the published description has the valves keep working, so a valve-switching failure cannot arise there. Engines that do close valves rely on oil pressure acting on switching lifters, as NHTSA's review of GM's lifter design lays out in detail; contaminated or low oil and worn locking pins are the usual reasons for a missed switch. The electrical counterparts on cylinder 11 are P3481, P3483 and P3484.

SystemPowertrain
Typegeneric or reserved
GroupP3
Range / number4 / 82

Possible causes

  • Contaminated or insufficient oil for switching cylinder 11 high
  • Worn or sticking locking pins at cylinder 11 medium
  • Oil screen to the cylinder 11 actuator clogged medium
  • Actuator seal leaking pressure low

Symptoms

  • Check engine lamp on
  • Misfire on cylinder 11 (P0311)
  • Noticeable shudder when switching modes

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P3482

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication