OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic or reserved

P3481

Cylinder 11 Deactivation/Intake Valve Control Circuit/Open

P3481 marks an open circuit to the actuator for deactivation or the intake valve of cylinder 11, a cylinder only V12 and W12 engines possess. No manufacturer documents this code publicly; J2012 reserves the codes for cylinders 9 to 12 for engines with more than eight cylinders. Bentley's W12, the best documented twelve-cylinder with shut-off, stops one complete bank of six and, according to its engineering chief, leaves the valves operating; the ECU alternates between bank A and bank B using intake and exhaust sensor data so cylinders and catalytic converter stay warm. With no valve actuator, there is no circuit for P3481 to check. On a design that has one, it means a broken wire, connector or coil. P3483 and P3484 report shorts, P3482 the function, P3485 the exhaust side.

SystemPowertrain
Typegeneric or reserved
GroupP3
Range / number4 / 81

Possible causes

  • Wire to the cylinder 11 actuator broken high
  • Cylinder 11 actuator coil open medium
  • Actuator connector at cylinder 11 loose or corroded medium
  • Driver stage in the engine control module failed low

Symptoms

  • Check engine lamp on
  • Engine stays on all twelve cylinders

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P3481

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication