OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic or reserved

P3473

Cylinder 10 Deactivation/Intake Valve Control Circuit/Open

P3473 reports an open circuit to the deactivation or intake valve actuator of cylinder 10, the last cylinder of a V10. No manufacturer documents this code publicly; J2012 reserves the codes for cylinders 9 to 12 for engines with more than eight cylinders. The V10 engines known for cylinder shut-off are Audi's 5.2 FSI in the R8 and Lamborghini's Huracán from model year 2016. Audi says its system idles one bank in the upper four gears by switching off injection and ignition, so it needs no valve actuator that this code could watch. On a twelve-cylinder engine with valve deactivation the code would mean a broken wire, an open coil or a bad connector at cylinder 10. P3475 and P3476 deal with shorts, P3474 with the mechanical result, P3477 with the exhaust valve.

SystemPowertrain
Typegeneric or reserved
GroupP3
Range / number4 / 73

Possible causes

  • Wire to the cylinder 10 actuator open or chafed high
  • Cylinder 10 solenoid coil open medium
  • Corroded or loose connector at cylinder 10 medium
  • Engine control module driver failed low

Symptoms

  • Check engine lamp on
  • Engine no longer switches to reduced-cylinder mode

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P3473

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication