OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic or reserved

P3470

Cylinder 9 Exhaust Valve Control Performance

P3470 covers a cylinder 9 exhaust valve that does not follow its deactivation command although the control circuit shows no electrical fault. No manufacturer documents this code publicly; J2012 reserves the codes for cylinders 9 to 12 for engines with more than eight cylinders. The risk behind it is described in a Ford patent: an exhaust valve that keeps opening after shut-off spoils the gas cushion in the cylinder and can be detected from changes in exhaust pressure. The opposite case, a valve that stays shut on reactivation, traps hot gas under pressure. Neither the Lamborghini Aventador V12 nor the Huracán V10 publishes how their bank shut-off works, and Audi's V10 simply cuts injection and ignition, so this check has no known user. Electrical faults of the same actuator: P3469, P3471, P3472.

SystemPowertrain
Typegeneric or reserved
GroupP3
Range / number4 / 70

Possible causes

  • Exhaust switching element of cylinder 9 stuck medium
  • Insufficient oil pressure for the exhaust switch medium
  • Exhaust actuator sluggish low

Symptoms

  • Check engine lamp on
  • Knock or jolt when cylinder 9 comes back in
  • Misfire on cylinder 9 (P0309)

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P3470

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication