P3461
Cylinder 8 Exhaust Valve Control Circuit/Open
In the J2012 scheme, P3461 marks lost continuity to an exhaust-side actuator of its own on cylinder 8. No manufacturer documents this code publicly. In the published sources, cylinder 8 is deactivated only by GM's newer V8s (DFM on the L84 and L87, a fixed 2-3-5-8 pattern on the LTA and LT2), and per NHTSA those engines feed both lifters of a cylinder from one solenoid, leaving no separate exhaust wiring to test. A GM patent application likewise uses one shared hydraulic valve and only staggers the exhaust valves ahead of the intake valves; only a separate exhaust actuator would fall under CARB's continuity check for output components. P3462 to P3464 are the other cylinder 8 exhaust codes, P3457 the intake-side open.
Possible causes
- Wire or plug to the cylinder 8 exhaust actuator broken medium
- Exhaust actuator winding open medium
- Control module output defective low
Symptoms
- Check engine lamp on
- Cylinder deactivation no longer active
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P3461
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.