P3457
Cylinder 8 Deactivation/Intake Valve Control Circuit/Open
Cylinder 8 is not among the cylinders that classic Active Fuel Management or Chrysler's MDS shut off (both use 1, 4, 6 and 7), so P3457 is documented only for newer designs. GM's 2019 tables list it for the L84 with Dynamic Fuel Management, which can deactivate every cylinder: more than 200 kohm with the low-side driver off, 20 of 25 samples every 250 ms from 425 rpm, Type B. GM's AFM/DFM information bulletin adds that the LTA and LT2 engines deactivate cylinders 2, 3, 5 and 8. GM also notes that some controllers store P3459 together with an open. P3458 is the function code for cylinder 8, P3459 and P3460 the short-circuit codes.
Possible causes
- Wire to the cylinder 8 solenoid broken or chafed in the lifter valley harness high
- Open winding in the cylinder 8 solenoid medium
- Poor contact at the solenoid connector medium
- Engine control module output stage faulty low
Symptoms
- Check engine lamp on
- Dynamic cylinder deactivation inhibited
- P3459 may be stored alongside on some GM controllers
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P3457
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.