OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic or reserved

P3454

Cylinder 7 Exhaust Valve Control Performance

P3454 covers an exhaust valve on cylinder 7 that does not switch as commanded, with no electrical fault on its control circuit. No manufacturer documents this code publicly. GM's own cylinder 7 check P318F on the 2019 L84 shows why the exhaust side matters: if the exhaust valve fails to open and release the burned gas, the trapped charge is compressed again, cylinder pressure climbs and the intake mechanism can be damaged on reactivation, so the ECM reacts at once (crankshaft jerk test, 66 of 100 samples, Type B). A Ford patent tackles the reverse problem, an exhaust valve still opening after deactivation, spotted through exhaust pressure. P3453, P3455 and P3456 are the electrical codes.

SystemPowertrain
Typegeneric or reserved
GroupP3
Range / number4 / 54

Possible causes

  • Exhaust lifter of cylinder 7 stuck in the unlocked state medium
  • Oil pressure or oil quality inadequate for switching medium
  • Exhaust control valve slow or sticking low

Symptoms

  • Check engine lamp on
  • Hard knock or jolt when cylinder 7 is reactivated
  • Possible misfire on cylinder 7 (P0307)

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P3454

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication