OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic or reserved

P3450

Cylinder 7 Deactivation/Intake Valve Control Performance

P3450 reports that cylinder 7 does not deactivate or reactivate as commanded while its solenoid circuit checks out. FCA lists it as Cylinder 7 Deactivation Control Performance for the 6.4 l Heavy Duty Hemi with MDS (RAM 2500 to 5500, bulletins 18-082-16 and 18-036-20): the MIL lights and a PCM reflash cures it, with an optional calibration that also eases drone and shudder in MDS mode. On the 2025 F-150 5.0 l, Ford bulletin 26-2093, which replaces 25-2487, pairs it with P3442 and has the left-bank solenoid oil feed tube replaced under the valve cover. In GM's system, as NHTSA describes it, oil pressure moves locking pins so the lifter body travels without opening the valve. GM's L84 uses P349E. Electrical faults: P3449, P3451, P3452.

SystemPowertrain
Typegeneric or reserved
GroupP3
Range / number4 / 50

Possible causes

  • Restricted oil feed tube to the left-bank solenoids (Ford 5.0 l, TSB 26-2093) medium
  • Outdated PCM calibration (FCA 6.4 l, bulletins 18-082-16 and 18-036-20) medium
  • Locking pins in a cylinder 7 lifter sticking from wear or dirt medium
  • Insufficient or aged oil delaying the switch medium

Symptoms

  • Check engine lamp on
  • Ticking noise from the valve train
  • Misfire on cylinder 7 (P0307)
  • Reduced-cylinder mode switched off

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P3450

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication