P3445
Cylinder 6 Exhaust Valve Control Circuit/Open
P3445 is defined for a break in the wiring of a stand-alone actuator that would control the exhaust valves of cylinder 6. No manufacturer documents this code publicly. The engines that deactivate cylinder 6 today, GM's AFM and DFM V8s and Chrysler's Hemi with MDS, publish only intake-side codes for this cylinder (P3441, and at GM also P3443 and P3444). NHTSA's description of GM's DFM hardware explains why: a single solenoid per cylinder sends oil to the intake and the exhaust lifters alike, which then unlock one after the other. An engine with its own exhaust-side actuators would have to check their wiring for continuity under CARB's rules for output components, and that is the fault this code names. P3446 to P3448 complete the exhaust group.
Possible causes
- Broken wire or loose connector at the cylinder 6 exhaust actuator medium
- Actuator coil interrupted medium
- Output stage in the control module faulty low
Symptoms
- Check engine lamp on
- Cylinder deactivation disabled
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P3445
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.