OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic or reserved

P3444

Cylinder 6 Deactivation/Intake Valve Control Circuit High

P3444 is set when the output that switches the cylinder 6 deactivation solenoid to ground still sees supply voltage while it is turned on, meaning the line has a short to power instead of a path through the coil. GM tests this on the 2019 L84, L86 and LT4 V8s with a limit of 0.5 ohm to controller power, 20 errors out of 25 samples at 250 ms intervals and Type B lamp logic. On the L84, whose solenoids also have a switched high-side feed, a short to voltage on that feed has the separate GM code P3115. Because the ECM can no longer energize the valve, cylinder 6 simply keeps firing and the engine gives up four-cylinder operation. Compare P3441 (open) and P3443 (short to ground).

SystemPowertrain
Typegeneric or reserved
GroupP3
Range / number4 / 44

Possible causes

  • Cylinder 6 control wire in contact with a supply wire in the harness high
  • Shorted turns in the cylinder 6 solenoid coil medium
  • Faulty output stage in the engine control module low

Symptoms

  • Check engine lamp on
  • Engine runs on all eight cylinders permanently
  • Slightly higher fuel consumption at light load

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P3444

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication