OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic or reserved

P3442

Cylinder 6 Deactivation/Intake Valve Control Performance

P3442 reports that cylinder 6 does not switch off or back on as commanded although its control circuit tests fine. FCA uses it as Cylinder 6 Deactivation Control Performance on the 6.4 l Heavy Duty Hemi with MDS in RAM 2500 to 5500 trucks: bulletins 18-082-16 and 18-036-20 list it with P3402, P3426 and P3450 under a lit MIL and fix it with new PCM software. Ford stores it on 2025 F-150 5.0 l trucks built January to April 2025: bulletin 25-2487, replaced by 26-2093, traces P3442 and P3450 to a restricted oil feed tube for the left-bank deactivation solenoids, which is renewed under the valve cover. GM's L84 judges cylinder 6 under its own code P349D. Electrical faults on the same channel are P3441, P3443 and P3444.

SystemPowertrain
Typegeneric or reserved
GroupP3
Range / number4 / 42

Possible causes

  • Outdated PCM calibration (FCA 6.4 l, bulletins 18-082-16 and 18-036-20) medium
  • Restricted oil feed tube to the left-bank solenoids (Ford 5.0 l, TSB 26-2093) medium
  • Oil level too low, wrong grade or worn oil, so pressure builds too slowly medium
  • Deactivating lifter of cylinder 6 not locking or unlocking low

Symptoms

  • Check engine lamp on
  • Jerk or vibration when the engine changes between eight and four cylinders
  • Misfire on cylinder 6 (P0306)
  • Fuel consumption rises because deactivation is locked out

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P3442

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication