P3441
Cylinder 6 Deactivation/Intake Valve Control Circuit/Open
Cylinder 6 belongs to both classic V8 deactivation groups, so P3441 is a code that real engines set. On GM V8s with Active Fuel Management, which park cylinders 1, 7, 6 and 4, the 2019 tables list it for the L86 truck engine and the LT4 Corvette: with the low-side driver off, more than 200 kohm between output and ground counts as an open, and 20 failures in 25 samples (every 250 ms, from 400 rpm) store a Type B code. The L84 with Dynamic Fuel Management runs the same check from 425 rpm. Chrysler names P3441 for the 5.7 L Hemi with MDS; a STAR case blames a heat shield rubbing through the solenoid harness. Shorts on this circuit are P3443 and P3444.
Possible causes
- Solenoid harness broken or chafed through (on the 5.7 L Hemi by the manifold heat shield) high
- Open coil in the cylinder 6 deactivation solenoid medium
- Loose or corroded connector at the cylinder 6 solenoid medium
- Control module software that needs an update (Chrysler TSB 18-002-25) low
Symptoms
- Check engine lamp on
- Engine no longer drops to four-cylinder mode
- Possibly circuit codes for cylinders 1, 4 and 7 as well if the shared harness is damaged
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P3441
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.