P3440
Cylinder 5 Exhaust Valve Control Circuit High
P3440 closes the cylinder 5 block and stands for a high signal, usually a short to supply voltage, in the circuit of a separate exhaust valve actuator. No manufacturer documents this code publicly. The code only makes sense on an engine with a separate exhaust actuator; a Ford patent, for example, checks via exhaust pressure whether an exhaust valve still opens after deactivation. Current production systems that deactivate cylinder 5 drive both valves from one solenoid, and GM reports a short to power there as P3436, checked with the driver on and a 0.5 ohm limit. If a dedicated exhaust channel did short high, the computer would stop using deactivation and light the lamp. Compare P3437, P3438 and P3439.
Possible causes
- Exhaust actuator control wire shorted to voltage medium
- Shorted actuator coil medium
- Engine control module output stage fault low
Symptoms
- Check engine lamp on
- Cylinder deactivation unavailable
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P3440
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.