P3434
Cylinder 5 Deactivation/Intake Valve Control Performance
With P3434 the computer has found that cylinder 5 does not switch off or back on correctly, while the control circuit tests fine. No manufacturer documents this code publicly. GM's L84 runs the equivalent test under P349C: manifold pressure stays too high while cylinder 5 is commanded off, meaning its valves keep working. For 3.6 L V6 engines, GM bulletin 21-NA-036 describes the field picture: misfires on cylinder 5 (P0305), sometimes only after a reduced-cylinder phase, from oil leaking past the control valve or rockers that do not latch, and asks to check for a solenoid tip broken off in the bore. Wiring faults for this cylinder are P3433, P3435 and P3436.
Possible causes
- Oil leaking past the cylinder 5 control valve seal high
- Switching rocker or lifter of cylinder 5 not latching medium
- Solenoid tip broken off in the bore low
- Low or aged engine oil low
Symptoms
- Misfire on cylinder 5 (P0305)
- Check engine lamp on
- Shaking after reduced-cylinder operation
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P3434
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.