P3433
Cylinder 5 Deactivation/Intake Valve Control Circuit/Open
P3433 reports an open control circuit to the deactivation valve of cylinder 5, and GM has used it across three generations. The 2007 V6 with Displacement on Demand, which shut off cylinders 1, 3 and 5, already flagged a short or open after 30 failures in 100 samples at 250 ms above 800 rpm. On the 3.6 L V6 (LGX, LGZ) cylinder 5 is an active fuel management cylinder, and GM tied P3433 to oil leaking from the rocker arm control valve in the camshaft cover. The 2019 L84 V8 tests every cylinder with a 200 kohm limit. Each time it is a Type B code. P3434 to P3436 are the function and short codes for the same cylinder.
Possible causes
- Oil leaking at the cylinder 5 control valve into its connector (GM 3.6 L V6) high
- Broken wire or spread terminal in the solenoid circuit medium
- Open coil in the cylinder 5 solenoid medium
- Engine control module output fault low
Symptoms
- Check engine lamp on
- Oil seepage at the valve cover control valve (V6)
- Reduced-cylinder mode no longer used
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P3433
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.