OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic or reserved

P3426

Cylinder 4 Deactivation/Intake Valve Control Performance

P3426 is one of the few performance codes in this range that makers really use. FCA calls it Cylinder 4 Deactivation Control Performance on the 6.4 l Heavy Duty Hemi with MDS; bulletins 18-082-16 and 18-036-20 list it with P3402, P3442 and P3450 and fix it with new PCM software. Ford stores it on the 2025 F-150 5.0 l: bulletin 25-2487, replaced by 26-2093, traces P3402 and P3426 to a restricted oil feed tube for the right-bank deactivation solenoids, which is replaced under the valve cover. GM checks cylinder 4 mechanically under P349B instead. Circuit faults are P3425, P3427 and P3428. The lamp comes on, and the engine may run rough or stay in full-cylinder mode.

SystemPowertrain
Typegeneric or reserved
GroupP3
Range / number4 / 26

Possible causes

  • Restricted oil feed tube to the deactivation solenoids (Ford 5.0 l, TSB 26-2093) high
  • Control software needing an update (FCA 6.4 l Hemi) medium
  • Low or worn-out engine oil medium
  • Deactivating lifter of cylinder 4 sticking low

Symptoms

  • Check engine lamp on
  • Misfire on cylinder 4 or rough running
  • Drone or shudder at light throttle

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P3426

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication