OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic or reserved

P3425

Cylinder 4 Deactivation/Intake Valve Control Circuit/Open

Cylinder 4 is one of the four cylinders that classic V8 cylinder deactivation shuts off, together with 1, 6 and 7, both at GM (Active Fuel Management) and on the Chrysler 5.7 L Hemi with MDS. That makes P3425 one of the best documented codes in this range. GM's 2019 tables for the L84 and L86 flag an open when the off-state output shows more than 200 kohm, 20 of 25 samples, Type B. Chrysler lists it as Cylinder 4 Deactivation Control Circuit; a STAR case describes the driver-side exhaust manifold heat shield wearing through the solenoid harness and asks for at least 15 mm clearance. P3427 and P3428 cover shorts on the same circuit.

SystemPowertrain
Typegeneric or reserved
GroupP3
Range / number4 / 25

Possible causes

  • Solenoid harness chafed through by the exhaust manifold heat shield (5.7 L Hemi) high
  • Open coil in the cylinder 4 deactivation solenoid medium
  • Corroded or loose solenoid connector medium
  • Control module software needing an update (Chrysler TSB 18-002-25) low

Symptoms

  • Check engine lamp on
  • Engine stays in eight-cylinder mode
  • Further circuit codes for cylinders 1, 6 and 7 if the shared harness is damaged

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P3425

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication