P3424
Cylinder 3 Exhaust Valve Control Circuit High
P3424 closes the cylinder 3 block and stands for an exhaust actuator control line that is held at supply voltage. No manufacturer documents this code publicly. The L84 from GM shows how far one shared solenoid can be monitored without it: for cylinder 3 the ECM checks a low-side driver under P3417, P3419 and P3420 and a high-side driver under extra codes of its own, yet none of them is exhaust-only. A GM patent application explains why: one hydraulic switching valve per cylinder pair serves intake and exhaust, the order being set by the cam lobes. The nearest documented test is the one behind P3420, in which a supply connection of less than half an ohm, seen with the output active, is judged a short. A driver would notice only the lamp.
Possible causes
- Exhaust actuator wire chafed against a supply line medium
- Shorted turns in the exhaust actuator of cylinder 3 medium
- Engine control module output fault low
Symptoms
- Check engine lamp on
- Engine runs on all cylinders permanently
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P3424
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.