P3423
Cylinder 3 Exhaust Valve Control Circuit Low
P3423 points to a grounded control wire at a dedicated cylinder 3 exhaust actuator. No manufacturer documents this code publicly, and NHTSA's 2025 look at GM's DFM engines shows why: each cylinder has just one lifter oil solenoid, and it feeds both lifters, intake and exhaust, so there is no separate exhaust output that could fail. For that same solenoid on cylinder 3, GM's L84 table flags a resistance to ground under half an ohm at rest and files it as P3419. The 2007 Displacement on Demand application likewise lists only one solenoid circuit for cylinder 3. Any design with its own exhaust output would fall under the CARB duty to detect shorts. Effect: warning lamp, cylinder 3 stays active.
Possible causes
- Exhaust actuator wire of cylinder 3 shorted to engine ground medium
- Actuator winding shorted to its housing medium
- Faulty output stage in the control module low
Symptoms
- Check engine lamp on
- No switch to reduced-cylinder operation
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P3423
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.