OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic or reserved

P341D

Deactivation/Exhaust Valve Control Circuit Performance Bank 2

P341D appears once the bank 2 exhaust valves respond wrongly to a deactivation or reactivation request while the electrical side is intact. No manufacturer documents this code publicly. Timing is the critical part: a GM patent application has the exhaust valves stop before the intake valves when a cylinder is switched off and resume before them when it comes back, so that burnt gas is expelled and no fresh charge is trapped. GM's DFM V8, as NHTSA describes it, reverses this and stops the intake side first. If the exhaust side lags, the planned order breaks. CARB expects outputs like this to be checked for proper function. The circuit code for this bank is P340D, the bank 1 equivalent P341C, the intake function on bank 2 P341B. Expect a lamp, harsh mode changes and higher fuel use.

SystemPowertrain
Typegeneric or reserved
GroupP3
Range / number4 / 1D

Possible causes

  • Exhaust lifter or rocker on bank 2 switching late or not at all medium
  • Oil too thin, too old or too low for fast switching medium
  • Sluggish bank 2 exhaust actuator valve low

Symptoms

  • Check engine lamp on
  • Bump or shudder during mode changes
  • Higher fuel consumption

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P341D

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication