OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic or reserved

P3418

Cylinder 3 Deactivation/Intake Valve Control Performance

P3418 is meant for a cylinder 3 deactivation that is wired correctly yet does not respond as requested: the cylinder keeps breathing when it should rest, or fails to come back. No manufacturer documents this code publicly. GM tests the hardware of cylinder 3 under its own code P349A; bulletin 20-NA-204 for the 2021 L84 and L87 notes that a voltage dip during cranking can briefly disable the outputs and set that code without a real fault. Honda shows the same failure pattern in another form: in bulletin 13-055 excess cold-start oil pressure pushed cylinders 1 to 4 into cut mode uncommanded, logged as P3400/P3497 with misfires. Circuit faults belong to P3417, P3419 and P3420. Expect rough running and a misfire code.

SystemPowertrain
Typegeneric or reserved
GroupP3
Range / number4 / 18

Possible causes

  • Low oil level, wrong viscosity or aged oil high
  • Lifter or rocker of cylinder 3 not locking or unlocking medium
  • Cylinder 3 control valve sticking or its screen blocked medium
  • Oil pressure too high or too low for the switching window low

Symptoms

  • Misfire code for cylinder 3 (P0303)
  • Shudder when the engine changes between modes
  • Check engine lamp on

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P3418

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication