P3415
Cylinder 2 Exhaust Valve Control Circuit Low
P3415 describes a control circuit for a dedicated cylinder 2 exhaust valve actuator that is pulled toward ground. No manufacturer documents this code publicly. Cylinder 2 itself is a common deactivation candidate: GM switches it off on its 3.6 l and 3.0 l V6 engines (bulletin 21-NA-036) and on DFM V8s, but there one oil control valve serves the whole cylinder, so wiring faults land on the intake-side codes P3409, P3411 and P3412. On the L84, GM treats a resistance to ground below 0.5 ohm, read while the output stage is inactive, as a short. CARB wants these outputs tested for shorts. Siblings: P3413 open, P3414 function, P3416 short to power; cylinder 1 uses P3407. The engine keeps running on all cylinders.
Possible causes
- Control wire of the cylinder 2 exhaust actuator touching ground medium
- Internal short in the cylinder 2 exhaust actuator medium
- Damaged output stage in the engine control module low
Symptoms
- Check engine lamp on
- Cylinder deactivation inhibited
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P3415
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.