P3411
Cylinder 2 Deactivation/Intake Valve Control Circuit Low
P3411 means the control output for the cylinder 2 deactivation valve sees a short to ground. GM lists it for the L84 V8 (2019), whose Dynamic Fuel Management can switch off any cylinder: below 0.5 ohm to ground with the low-side driver off, 20 failures in 25 samples every 250 ms, at least 11 V on the powertrain relay and 425 rpm. It is a Type B fault, so the lamp lights after two trips in a row. GM notes that some controllers set P3409 together with it. On engines where cylinder 2 cannot be deactivated the code has no use. The fix is usually in the wiring or the solenoid in the engine valley; P3412 is the short to power.
Possible causes
- Damaged insulation lets the control wire touch ground high
- Cylinder 2 solenoid shorted internally medium
- Faulty engine control module driver low
Symptoms
- Check engine lamp after two trips
- Dynamic Fuel Management inactive, engine stays on all cylinders
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P3411
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.